Password Structure; Password Levels - KEB COMBIVERT R6-N Programming Manual

2.2 Password structure

The KEB COMBIVERT is equipped with an extensive password protection. With the individual passwords it is
possible:
Dependent on the actual operation mode the password can be entered in the following parameters:

2.2.1 Password levels

The parameter value of the parameters above displays the actual password level. The following displays are
possible:
© KEB, 2015-07 COMBIVERT R6-N
- to change the operating mode
- to set a write protection
- to activate the service mode
if the CP mode is activated
if the application mode is activated
CP - read only
CP - on
CP service
Application
Password input
Only the Customer-parameter group is visible,
exept for CP. 0 all parameters are in the read-only
status (see chapter 4.3).
Only the customer parameter group is visible. All
parameters can be changed.
Like CP-on, however the parameter identification
is displayed in accordance with its origin parameter
(see chapter 4.3)
All application parameters are visible and can be
changed. The CP-Parameters are not visible.
2
10
Page2.2 - 3