Introduction; Intellipool Functions; Content Of Packaging P - Pentair IntelliPool User Manual

Content of Packaging
1 - Control Center
3 - Probe unit (and its 4 probes supplied separately)
5 - Radio relay
6 - pH calibration solutions
8 - RJ45 cable
10 - 8 x AA ProCell batteries (resistant to +70 °C)
12 - Internet relay
14 - 3 strain relief bushings, 12 mm diam., for pH/ORP/Conduct. probes
INTELLIPOOL
®
C O N T R O L
28/04/2017 15:23:48
Water temp. :+29.0°C
pH:7.8 ORP:607mV
Cond:5264uS 3.28g/l
ESC VALID
4 7
6
7

Introduction

Your new IntelliPool ® system will provide fully automated management to your pool system. It controls and manages the water quality and permits
remote access to all the comfort functions of your pool for you and/or your professional. The result is a safer pool.
IntelliPool® will also be able to make substantial savings in terms of operation of your pool. Its unique control of IntelliFlo®, a variable speed pump,
assures the lowest possible consumption of power while maintaining the water quality with optimal filtration. These savings can be as much as
90%. Automatic control also reduces the use of chemical products and makes it possible to extend the life of a salt chlorinator.
IntelliPool® will also be able to adapt the filtration, disinfection and other functions while the pool is covered.
The increased convenience of using your pool will be the aspect of IntelliPool ® that you appreciate the most. The lights, heating and filtration can
be checked anywhere, at any time, by using any smartphone, computer or tablet. Automatic backwash is possible by using a specific valve on the
filter.
IntelliPool® uses precision and control sensors. Please follow the recommendations described in this manual and use professional help to install
your system.
The only thing now is to install your pool and enjoy it!
IntelliPool® functions
IntelliPool® manages the variation speed of IntelliFlo® according to: Water temperature/Position of the pool cover/Specific functions (waterfalls,
heating, IntelliChlor®)
- Optimisation of the IntelliFlo® rotation speed
- Modes: Automatic/ON/OFF/Schedule
- Disinfection based on the RedOx (ORP) measurement
- pH monitoring and dosing (pH + or pH-) including empty tank information
- Measurement of the conductivity to communicate the salt concentration
- Control of heating and setting of the temperature
- Lighting ON/OFF, clock mode and selection of IntelliBrite® colours
- Auxiliary outlet: - Automatic backwash (with push/pull valve) - accessory function (with a second pump or a 3-way valve) -
- ON/OFF mode, clock
All these characteristics can be accessed directly from IntelliPool® or from a smartphone/tablet
4
x11
2
x7
pH
O.R.P.
1
Conductivity
8 9
2 - Seals for electrical connections
4 - Internal display
7 - Female USB cable/mini USB (Probe Unit update)
9 - power supply of the internet relay (110 V/230 V compatible)
11 - IntelliComm communication cable
13 - Webbed strip, 50/70 mm diameter, for the temperature sensor
INTELLIPOOL
®
P R O B E U N I T
Water temperature
pH
ORP
Conductivity
8 x AA
10 11
®
5
3
4
12 13
x3 x3
14