Correction Of Values From The Intellipool Account P - Pentair IntelliPool User Manual

Correction of values from the IntelliPool account
Despite calibration of the measurement sensors, a value may be out of step with another measurement marker (usual thermometer, etc.). For this,
you have the option of voluntarily correcting certain values and/or air and water temperature units (pre-set in the factory at °C) and the conductivity
(pre-set in the factory in µS).
1 - Put the switch in Calib. mode (on the back of the indoor display)
2 - Follow the procedure.
3 - When the modifications are approved, put the switch back in ON mode.
Correction of the read values: 45000
Probe > Initialisation> Settings > Correction > Result
Correction of the read values: 45000
Modification(s) are being processed
Probe > Initialisation >
Initialisation
Initialisation of the correction
Correction of the read values: 45000
Probe > Initialisation > Settings
Settings
40
Choice of probe
Choose...
Choose...
Conductivity
Next
pH
Settings > Correction > Result
In progress
Previous Next
Correction > Result
Setpoint 7
Previous Next
Correction of the read values: 45000
Modification(s) are being processed
Probe > Initialisation > Settings > Correction >
In progress
Correction of the read values: 45000
Modification(s) are being processed
Probe > Initialisation > Settings > Correction Result
Result
Correction approved
!
Result
Setpoint 7.1
Coe cient 1.4 %
Previous Next
Previous