Internet Relay - Pentair IntelliPool User Manual

Internet relay - your pool is accessible 24h/day at www.intellipool.eu
The internet relay makes it possible to remain in contact with the installation via the internet (even if the home computer is switched off). Whatever
your type of computer (PC or MAC), you have access to real time data and can also work on the settings and commands.
Simply connect the internet relay to your internet "box" and connection to the Pentair server is automatic. By following the instructions, and after
creating your free account at www.intellipool.eu, you can connect to your installation in a few minutes.
1 - Connect one end of the supplied Ethernet cable to the Ethernet port of your internet relay. Then connect the other end of the Ethernet cable to
a free Ethernet port of your box or ADSL modem. The supplied Ethernet cable can be replaced by an equivalent cable with a maximum length of
100 m. If you do not have a free Ethernet port on your "box" or ADSL modem, we advise you to obtain an Ethernet switch to permanently connect
your installation. 2 - Power the internet relay by connecting it only to the supplied mains supply.
The internet relay is automatically configured, provided the DHCP server of your internet "box" is activated (in the vast majority of cases, the DHCP
server is activated by default on installation of your internet "box"). This function can be accessed via the management menu of your internet "box",
refer to your internet access supplier for more details. Check that the internet relay works properly with the LED on the device (see the illustration
below).
Transmission of data in
progress
6
2
2
1
- Not lit = not connected to the server
> Check the power supply, connection of the Ethernet cable and the internet
connection.
- Lit = connected to the server
- Flashing = sending data in progress
- Off = Initialisation fault or no supply
> Check the connection of the 230-V supply.
- Slow blinking = no network
> Check the connection of the Ethernet cable and check the internet connection.
- Quick flashing = DHCP resolution in progress
> Takes less than a second. If the flashing continues, check the activation of the
DHCP in the management interface of your internet "box"
Light is permanently lit = network connection
> The internet relay is connected to the network.
1