Introduction; Overview; Features; Packaged Contents - Pentair ChemCheck Installation And Service Manual

Overview

The ChemCheck™ Water Quality Monitor electrode
samples water from the pool or spa and determines
water pH, Oxidation-Reduction Potential (ORP) and
temperature. When paired with the Pentair Home app,
the ChemCheck allows for easy and real-time remote
monitoring of pool water chemistry and temperature.
pH
pH (0-14) is the scale of relative acidity or alkalinity.
The ideal pH range for pools and spas is 7.2 - 7.8.
• Maintaining a pH below 7.2 (too acidic) can cause
eye irritation, corrosion of equipment and/or
damage to pool surfaces.
• Maintaining a pH above 7.8 (too alkaline),
sanitizer activity is reduced, water may become
cloudy, and eye irritation may result.
Oxidation-Reduction Potential (ORP)
ORP is a measure of a sanitizers (chlorine, ozone, etc.)
ability to oxidize or reduce water contaminants. The ideal
ORP for pools and spas is 650 - 750 mV.
Pool ORP level can be affected by a variety of things,
such as temperature, pH and the intensity of sunlight.

Features

• Multifunction electrode senses ORP, pH and
water temperature
• Remote pH, ORP and water temperature
monitoring via the Pentair Home app
• Battery or AC-powered
• Real-time water balance status
• Integrated flow indicator
• Factory installed in-line prefilter

Packaged Contents

1. Flow Cell
2. 3/8" Tubing - 20 ft. (6 m)
3. Installation Kit
• Screw Anchors (Qty. 4)
• Mounting Screws (Qty. 4)
• Pipe Clamps (Qty. 2)
• Gaskets (Qty. 2)
• Tube Fittings (Qty. 2)
• Compression Nuts (Qty. 2)
4. Electrode
5. Power Supply (P/N 523476 only)
6. Battery Pack (P/N 523402 only)
CHEMCHECK™ Water Quality Monitor Install and Service Guide

INTRODUCTION

1