Emerson Daniel 3410 Series Retrofit Instructions page 72

Summary table of communications/output settings
Table B-1:
Output Type
Frequency Output 1B
Frequency Output 2A
Frequency Output 2B
Analog Input 1
Analog Input 2
Analog Output 1
Analog Output 2 (HART Capable)
Enter the results of the 3400 Summary Table of Communications/output settings in the
table below as a quick reference to setup the 3410 Series meter configuration parameters.
Table B-2:
Output Type
Serial Port A
Serial Port B
Serial Port C
Digital Output 1A
Digital Output 1B
Frequency Output 1A
Digital Output 2A
Digital Output 2B
Frequency Output 1B
Frequency Output 2A
Frequency Output 2B
Analog Input 1
62
Communications/output settings summary table
(Check electronics switch settings and circle appropriate
box for each output)
Not Used (if
J5-1 not
used)
Not Used (if
J5-6 not
used)
Not Used (if
J5-5 not
used)
Not used (if
J12-1 not
used)
Not Used (if
J12-3 not
used)
Not Used (if
J11 not used)
Not Used (if
J10 not used)
Communications/output settings summary table results
Enter communications and output settings
(1)
(continued)
TTL (if S8-4 is Open Collec-
set to TTL) tor (if S8-4 is
set to OC)
TTL (if S9-3 is Open Collec-
set to TTL) tor (if S9-3 is
set to OC)
TTL (If S9-4 is Open Collec-
set to TTL) tor (if S9-4 is
set to OC)
Source (if Sink (if S12 is
S12 is set to set to SINK)
SRC)
Source (if Sink (if S13 is
S13 is set to set to SINK)
SRC)
Source (if Sink (if S14 is
S14 is set to set to SINK)
SRC)
Source (if Sink (if S15 is
S15 is set to set to SINK)
SRC)
Retrofit Instructions