Mounting And Sensor Wiring; Mounting And Sensor Wiring For Integral-Mount Transmitters; Mount The Transmitter To A Wall Or Instrument Pole - Emerson Micro Motion 4200 Installation Manual

Installation Manual
MMI-20058013
2

Mounting and sensor wiring

2.1 Mounting and sensor wiring for integral-
mount transmitters
There are no separate mounting requirements for integral transmitters, and no need to
connect wiring between the transmitter and the sensor.
2.2 Mount the transmitter to a wall or instrument
pole
There are two options available for mounting the transmitter:
• Mount the transmitter to a wall or flat surface.
• Mount the transmitter to an instrument pole.
Prerequisites
• If you are mounting the transmitter to a wall or flat surface:
—
—
• If you are mounting the transmitter to an instrument pole:
—
—
Procedure
1. Attach the mounting bracket to the transmitter and tighten the screws.
Installation Manual
Ensure that the surface is flat and rigid, does not vibrate, or move excessively.
Confirm that you have the necessary tools, and the mounting kit shipped with the
transmitter.
Ensure that the instrument pole extends at least 12 in (305 mm) from a rigid base,
and is no more than 2 in (51 mm) in diameter.
Confirm that you have the necessary tools, and the instrument-pole mounting kit
shipped with the transmitter.
Mounting and sensor wiring
April 2019
11