Using The Display Controls - Emerson Micro Motion 4200 Installation Manual

Installation Manual
MMI-20058013
6

Using the display controls

The transmitter display interface includes a display (LCD panel) and four capacitive
buttons – left, up, down, and right arrow keys – used to access the display menus and
navigate the display screens.
Procedure
1. To activate a capacitive button, press the desired button that is designated with
2. Use the arrow indicators on the display screen to identify which capacitive button to
Installation Manual
arrows (up, down, left, and right).
You can activate the capacitive button through the lens. Do not remove the
transmitter housing cover.
Important
The transmitter only detects one button selection at a time. Be sure to press your
thumb or finger on a single capacitive button.
Figure 6-1: Proper finger positioning for activating a capacitive button
use to navigate the screen (see examples 1 and 2).
Using the display controls
April 2019
37