Wiring the channels
April 2019
3.5
Access the wiring channels
Procedure
1. Remove the wiring access cover to reveal the I/O wiring terminal block connectors.
2. Confirm which transmitter channels are activated, or ON, and identify the type of
3. (Recommended) Record the channel and wiring configuration on the label provided
28
A. Channel A connections
B. Channel B connections
configuration you will be wiring to based on the options available.
Figure 3-5: Activated channel identification
inside the transmitter housing cover.
Installation Manual
MMI-20058013
®
Micro Motion
4200 2-Wire Transmitter