Mounting And Sensor Wiring; Mounting And Sensor Wiring For Integral-Mount Transmitters; Mounting Transmitters - Emerson Micro Motion 5700 Installation Manual

Installation Manual
MMI-20039473
3

Mounting and sensor wiring

3.1 Mounting and sensor wiring for integral-
mount transmitters
There are no separate mounting requirements for integral transmitters, and there is no
need to connect wiring between the transmitter and the sensor.
3.2

Mounting transmitters

There is one option available for mounting 1600 remote transmitters:
• Mount the transmitter to an instrument pole.
3.2.1 Mount the transmitter to a wall or flat surface
Prerequisites
• Ensure that the surface is flat and rigid and that it does not vibrate or move excessively.
• Confirm that you have the necessary tools and the mounting kit shipped with the
transmitter.
Procedure
1. Attach the mounting bracket to the transmitter and tighten the screws to 80 in lbf
Installation Manual
(9.04 N m) to 90 in lbf (10.17 N m).
Figure 3-1: Mounting bracket to an aluminum transmitter
Mounting and sensor wiring
October 2022
11