Wiring the channels
April 2019
3.7
Wire the Channel B mA output
To wire the mA output in explosion-proof, intrinsically safe, or nonhazardous installations,
follow this procedure.
Important
Meter installation and wiring should be performed only by suitably-trained personnel
using the appropriate government and corporate safety standards.
Procedure
Wire to the appropriate output terminal and pins.
Figure 3-8: Channel B mA output wiring (externally powered)
A
A. mA HART output
B. Supply Voltage (See
C. Loop Resistance (See
D. Input device
3.8
Wire Frequency/Discrete output (Channel B)
Use this procedure to wire the externally-powered Frequency Output or Discrete Output
for Channel B.
Important
Meter installation and wiring should be performed only by suitably-trained personnel
using the appropriate government and corporate safety standards.
Procedure
Wire to the appropriate output terminal and pins.
30
1
2
Figure
Figure 3-2
3-2.)
for maximum loop resistance.)
Installation Manual
MMI-20058013
B
C
D
®
Micro Motion
4200 2-Wire Transmitter