Table of Contents
Advertisement
CHASSIS
COVER FRONT SHOCK ABSORBER RIGHT REMOVAL
1. To remove the speedsensor cable (1), remove the screw (2).
NOTE
Look to the nut on the rear.
2. To remove the cover front shock absorber right (3) remove
the two screws (4).
3. To remove the side reflector (5), pull down the clip and pull
the side reflector sidewards.
4. Install the cover front shock absorber right in reverse order.
!
WARNING
When ever you remove a cover where a light or an electrical
component is installed disconnect those parts from the main
harness.
Do not damage any body cover during installation or
disassembly.
Do not damage the knuckle on body cover during installa-
tion or disassembly.
Align the panel and cover plate on the body cover with
their own grooves.
Correctly install the knuckle of each part in assembly.
No spare parts should be damaged in installation of the
cover.
1
2
3
4
5
148
Advertisement
Table of Contents
