Table of Contents
Advertisement
ELECTRICAL SYSTEM/ CHARGING SYSTEM
CHARGING SCHEME
CHARGING PERFORMANCE TEST
1. Remove the battery cover on the left side.
2. Stop the engine and open the fuse box.
3. Disconnect the wire from the fuse. Connect an ampere meter
(A) between the wire and fuse terminal.
4. Connect the battery positive (+) to the voltmeter (V) positive
(+) probe and battery negative (-) to the voltmeter negative
(-) probe.
5. Start the engine. Gradually increase engine speed to test the
output. If the clamping voltage exceeds the specified value
inspect the regulator rectifier.
6. Inspect the clamping voltage of lightning system.
V
A
120
Advertisement
Table of Contents
