Table of Contents
Advertisement
130
LIGHTNING SYSTEM
5. Pull the bulb (7) in and twist it clockwise till you can remove it.
6. Replace the defect bulb and reassemble in reverse order.
7
POSITION LIGHT BULB REPLACEMENT
To replace the position light bulb follow the below listed points of
1. and 2.
1
3. Pull out the position light plug (1).
4. Replace the defect bulb (2) and assemble in reverse order.
!
WARNING
2
When the bulb is lit, keep your hands and inflammable materials
some distance away from it. Lighting bulb is hot, touch it when it
cools down.
Avoid touching bulb glass with your bare hands during installation
and staining it with oil, which may affect transparency, service life
and luminous flux of bulb.
If oil is adhered to the bulb, clean it with a cloth
moistened with alcohol or highly volatile rubber
solution.
WHOLE HEADLIGHT REPLACEMENT
1. If it's necessary to replace the whole headlight disconnect the
headlight plug.
1
2. Remove the two screws (1) on the left and right side.
3. Disconnect the two parts of the headlight.
NOTE
Only one side (left side) is shown.
Advertisement
Table of Contents
