Table of Contents
Advertisement
STEERING
5. Loosen the screw (8) and slide the left handle switch to the
right.
6. Pull off the left grip from the handle bar would be more dif-
ficult as the grip is normally glued with grip glue.
We suggest to use compressed air (9) and in same way
pull the grip to the left.
NOTE
We suggest buying a new left handle grip if it is necessary to
replace the handlebar.
7. Disconnect the choke cable (10) and slide the left handle
switch to the left. It is not necessary to remove the rear
view mirror.
8. Replace the damaged handlebar.
9. Assemble the handlebar in reverse order.
CLUTCH LEVER REPLACEMENT
1. Loose the secure nut (1) for the clutch lever and unscrew
the clutch lever bolt (2).
2. Rotate the clutch cable adjustment nut (3) and the secure
nut (4) till the grooves are in line.
3. Now it is possible to remove the complete clutch lever to-
gether with the clutch cable from the clutch coupling joint.
4. Unhinge the clutch cable (5) from the clutch lever to replace
the clutch lever.
5. Assemble the new clutch lever in reverse order.
8
9
10
2
1
3
4
5
109
Advertisement
Table of Contents
