Electric Horn Inspection - KSR Moto TRIGGER 50 Repair Manual

ELECTRICAL SYSTEM/ INSTRUMENTS

ELECTRIC HORN INSPECTION

1. Disconnect the horn wire (1) from the horn (2).
2. The horn is works correct if it sounds when a 12V battery is
connected to the plugs.
If the horn does not work correct replace it.
ELECTRIC HORN REPLACEMENT
1. Remove the seat, the side covers the tank and the oil/water
tank.
2. Loosen the screw (3) (size: 13) and replace the horn.
! WARNING
If the horn works while it is connected to the battery but not when
pressing the handle switch check the cables and the
horn switch (4).
LEFT HANDLE SWITCH
1. Light switch
2. Winker switch
3. Horn switch
RIGHT HANDLE SWITCH
1. Start switch
2
3
1
4
3
2
1
135
1