Description Of Device; Diagnosis - Endress+Hauser Liquiphant FTL33 IO-Link Operating Instructions Manual

Description of device parameters
15 Description of device parameters
15.1

Diagnosis

Actual Diagnostics (STA)
Navigation
Description
Last Diagnostic (LST)
Navigation
Description
Simulation switch Output 1 (OU1)
Navigation
Description
Options
Simulation switch Output 2 (OU2)
40
Diagnosis → Actual Diagnostics (STA)
Displays the current device status.
Diagnosis → Last Diagnostic (LST)
Displays the latest device status (error or warning) that was
rectified during operation.
Diagnosis → Simulation switch Output 1 (OU1)
The simulation affects the process data only. It does not
affect the physical switch output. If a simulation is active, a
warning to this effect is displayed so that it is obvious to the
user that the device is in the simulation mode. A warning is
communicated via IO-Link (C485 - simulation active). The
simulation must be ended actively via the menu. If the
device is disconnected from the power supply during the
simulation and power is then resupplied, the simulation
mode is not resumed, and instead the device continues
operation in the measuring mode.
• Off
• OU1 = high
• OU1= low
Liquiphant FTL33 IO-Link
Endress+Hauser