Liquiphant FTL64 HART
4.2.2
Nameplate
The information that is required by law and is relevant to the device is shown on the
nameplate.
4.2.3
Manufacturer address
Endress+Hauser SE+Co. KG
Hauptstraße 1
79689 Maulburg, Germany
Place of manufacture: See nameplate.
4.3
Transporting the device
• Transport the device to the measuring point in the original packaging
• Hold the device by the housing, temperature spacer, process connection or extension pipe
• Do not bend, shorten or extend the tuning fork.
5
Mounting
Mounting instructions
• Any orientation for version with a pipe length of up to 500 mm (19.7 in) approx.
• Vertical orientation from above for device with long pipe
• Minimum distance between the tuning fork and the tank wall or pipe wall: 10 mm (0.39 in)
Endress+Hauser
Mounting
7