Parameters - Endress+Hauser Liquiphant FTL33 IO-Link Operating Instructions Manual

Liquiphant FTL33 IO-Link
15.2

Parameters

15.2.1 Application
Active switchpoints
Navigation
Description
Switch-on value
Options
Factory setting
Reset user switchpoints
Navigation
Note
Description
Options
Factory setting
Switch point value (coverage), Output 1/2 (SP1/SP2), Output 1/2 (FL1/FL2)
Switchback point value (coverage), Output 1/2 (rP1/rP2), Output 1/2 (FH1/FH2)
Endress+Hauser
Application → Active switchpoints
Choose from standard (0.7 / 0.5 g/cm
specific, user-definable switch points
Last setting selected prior to switching off device.
• Standard
• User
Standard
Application → Reset user switchpoints
This parameter is visible only if the User option is selected
in the Active Switchpoint parameter.
After selecting an output, switch point OU1 or OU2, the
switch output and its associated value are reset to the
factory setting.
• False
• switchpoints OU1
• switchpoints OU2
False
Description of device parameters
3 ) or customer-
43