Table of Contents
Advertisement
Number must be entered without "+" or "00".
Minimum
value
1 digit
If SMS data sending is enabled (ID=1130) first value in a list is server GSM number. The SMS with
24 coordinates is sent to this number.
Number must be entered without "+" or "00".
Minimum
value
1 digit
GSM operator codes are comma separated. First in a list is Home Operator Code, then Preferred
Roaming Operator Codes are written.
code which has to be configured. Up to 20 operator codes may be configured in 1 SMS. Example:
setparam 1141 16 24602,24603,24605
unchanged in the configuration.
Minimum
value
Empty
8.5
8.5.1.1 Min Period (ID=1540)
0 it means no records by min period will be saved.
Minimum
value
Downloaded from
www.Manualslib.com
8.4.12 Authorized phone numbers (ID=1130-1139)
If at least one number is entered then only those number can send messages to device.
Example: 37060012346
Maximum
Recommended
value
16 digits
8.4.13 SMS Event PreDefined Numbers (ID=150-159)
In this field are written GSM numbers, to which will be sent "Event SMS" text message.
Example: 37060012346
Maximum
Recommended
value
16 digits
8.4.14 Operator List (ID=1141 X)
Parameter defines operator list. According to this list module selects operating profile.
X defines starting position that is changed: If X is from 0 to 49, X means index of operator
th
th
Here 16
, 17
and 18
Maximum
Recommended
value
7 digits
Data Acquisition Modes parameters
8.5.1
Home Network GSM operator code "Vehicle on STOP" parameters
This parameter indicates time interval in seconds in order to acquire new record. If value is
Maximum
Recommended
value
0
2592000
manuals search engine
Goes with (depends on)
value
parameters
-
Goes with (depends on)
value
parameters
-
th
operator codes are set. Note! Other operator codes are left
Goes with (depends on)
value
parameters
-
Goes with (depends on)
value
-
S8[17]
S8[17]
parameters
Value
type
Value
type
Value
type
U32
Value
type
U32
58
Advertisement
Table of Contents
