Introduction; General Description - Presys PCON-Y17 Series Technical Manual

PRESYS
 Instruments

1 - Introduction

1.1. General Description

The PCON-Y17 Pressure Controller enables the control of pneumatic pressure
up to 3000 psi (210 bar), including gauge and absolute pressure (optional barometric
reference). Provides all features required for easier calibration and adjustment services
on process instruments such as pressure transmitters, pressure switches, and
manometers. It has a high level of accuracy, including aspects relating to changes in
room temperature, and it maintains the specifications over long periods of time.
Besides providing high accuracy pressure values, it also allows the measurement
of signals generated by the instrument under test which is being calibrated. This is
possible due to an embedded calibrator specific for these types of signal, including
current 4-20 mA. Thus, PCON-Y17 incorporates the functions of pressure controller,
digital pressure standard and calibrator for mA, V, mV, Ohms and RTD.
It is also a Hart
resistance, transmitter power supply and latest DD as optional, in order to easily
configure and calibrate Hart
A highly visible 5.7" touchscreen display allows easy configuration and user-
friendly operation.
PCON-Y17 features full advanced documenting capabilities. It enables the
creation and execution of automatic calibration procedures (Tasks). After completing a
task, a Calibration Report is issued and it can be printed directly on a USB connected
printer or a PDF document can be generated.
Communication with the computer through SCPI commands for on-line data
acquisition and control of the calibrator.
®
Communicator (optional) with a configurable internal
®
pressure transmitters.
PCON-Y17
Page 1