Built-In Web Server - Presys PCON-Y17 Series Technical Manual

PRESYS
 Instruments
2.6.2. Network
In NETWORK tab it is configured the IP address of the calibrator for Ethernet
communication with the computer. The IP address can be dynamically configured
(DHCP) or may have a fixed address (disable DHCP option and edit the desired
address).

2.7. Built-in Web Server

Before accessing the PCON-Y17 built-in web server, you must configure the
network settings (see section 2.6.2.). Connect the network cable into the Ethernet port of
PCON-Y17 on the front panel (see Fig. 01 for DT Version or Fig. 03 for Rack Mounting
Version).
To access the PCON-Y17 built-in webserver open the web browser on your
computer and enter the following address.
<calibrator_IP_address>:5000/pconserver/pages/main.cgi
User: admin
Password: xvmaster
To verify the PCON-Y17 IP address press the button indicated below.
Fig. 75 - IP address
PCON-Y17
Page 57