Settings - Presys PCON-Y17 Series Technical Manual

PRESYS
 Instruments

2.6. Settings

2.6.1. System
In the SYSTEM tab you can set the volume of the calibrator, the touch screen
calibration, identification of the calibrator, language, printer and security options.

Touch screen Options
To adjust the touch screen, press the TOUCHSCREEN OPTIONS button.
Press the places on the screen indicated by + (it is recommended to use the
stylus for touch screen). After the calibration, press again on the screen at any
point. Confirm the calibration to return to SYSTEM Menu.

Language Setting
Press the desired language for the system and confirm with the OK button. The
system must be restarted to save the configuration.

Calibrator Identification
In this option it is possible to identify your calibrator, choosing a TAG name,
Owner name and Location.

Sound Options
Press + or - to configure a value for the system audio volume.

Security Options
The instrument initially has no access password. This setting can be changed
in SECURITY OPTIONS.
To create a new user, press the key icon
blanks and press CREATE. It is possible to add a signature to be used when issuing a
calibration report through the TASK feature.
Pay attention to the functions that each user level has access in the table below:
User Level
Calibrator
Operator
Tec
Admin
To lock the system, press the padlock icon
PCON-Y17 is turned on, it will request login and password. To unlock the system, login
as an Admin Level user and press the padlock icon in the system menu again.

Adjust Cal.
Adjustment level protected by password (9875).
Page 56
Tasks
 
 
 
and then users icon
Function
Hart Data-Logger
®
 
 
 
in the system menu. The next time
PCON-Y17
. Fill in the
Settings


