PRESYS
Instruments
2.1.12. Leakage / Stability Test
The leakage / stability test measures the variation of a signal for a certain time. It
is useful, for example, to check for pressure leak in the system.
To do the test, put the PCON-Y17 in Measure mode (the pressure control valves
are off) and select the Input (Auxiliary) desired (the leakage / stability test may be done
with any of the Auxiliary Input signals, for testing the pressure in the control module
select PRESSURE → C1).
Fig. 50 - Leak test, select MEASURE mode and the Auxiliary Input
Press the Quick Navigator icon
Page 38
→ MENU → BAR GRAPH.
Fig. 51 - Menu (Quick Navigator)
PCON-Y17