Table of Contents
Advertisement
PRESYS
Instruments
a) Range Parameters
WARNING!
Before connecting the instrument under test to the output port it is
recommended to configure the output range parameters. These
parameters limit the controller output range, in order to protect the
instrument under test.
To change the pressure controller output range press the SETTINGS button
shown below and edit the Min and Max values in the RANGE tab.
Changing the output range is useful when the pressure range of the instrument
under test is lower than the control module range, to protect against overpressure at the
instrument.
Fig. 15 - Range parameters
PCON-Y17
Page 17
Advertisement
Table of Contents
