E) Preset Setpoints - Presys PCON-Y17 Series Technical Manual

PRESYS
 Instruments
Edit the Control Parameters by pressing the SETTINGS button shown below. Go
to the CONTROL tab and select the desired Control Mode option. For the Linear option,
also edit the SP Rate (in current pressure unit / second).

e) Preset Setpoints

Configure your most frequently used setpoints with the PRESET function. You
can edit up to eight points (P1 to P8). Pressing the OK button the setpoint is
automatically changed to the value of the corresponding point.
Another fast way to change the setpoint to the preset values is using a numeric
keyboard connected to the PCON-Y17 Type A USB (see section 1.5 – Parts
Identification). In Control Mode, when pressing from 0 to 7 in the keyboard the
corresponding preset setpoints P1 to P8 will be controlled.
Fig. 22 - Control Parameters
Fig. 23 - Preset Set points
PCON-Y17
Page 21