Table of Contents
Advertisement
PRESYS
Instruments
CALIBRATOR – selects the input/output functions (Pressure Control Module, Auxiliary
Input Signals and Pressure Measurement Module), see section 2.1.
– optional module that allows communication with devices that have Hart
®
HART
Communication Protocol, see section 2.2.
TASKS – performs calibrations automatically, see section 2.3.
DATA LOGGER – record measurements, enabling visualization on chart or table, see
section 2.4.
VIDEOS – features videos made by Presys to assist in the use of the calibrator, and can
also store videos made by the user, see section 2.5.
SETTINGS – general instrument settings, see section 2.6.
2.1. Calibrator Menu
To select the Pressure Control Module and the Auxiliary Input functions press
the CALIBRATOR button from the main menu.
When first entering the CALIBRATOR menu, the PCON-Y17 executes a VENT
operation and an AUTO RESET of the pressure read in the Pressure Control Module.
When it is done, it goes to MEASURE mode and opens the output isolation valve (see
the module layout in section 2.1.2). The following screen is displayed.
Page 8
Fig. 05 - Calibrator initialization
PCON-Y17
®
Advertisement
Table of Contents
