Data Logger - Presys PCON-Y17 Series Technical Manual

PRESYS
 Instruments
connected to the Type A USB Host port of PCON-Y17 (see section 1.5
Identification).
To access the files saved on the SD card (internal files / memory) of the
calibrator, connect the USB cable to the USB Type A port of the computer (USB type A)
and the USB Device port of the PCON-Y17 (USB type B for version RM, and USB micro
type for the DT version, see section 1.5 of this manual, "Identification of Parts").
The logo can be changed to one of your own company. To do this, connect a USB
cable between the USB Device port of the PCON-Y17 and the USB Type A port on the
computer. Change the LOGO.bmp file to your logo file (it should have a .bmp extension).
We recommend an image of size close to 200 x 200 pixels.
To add your signature to the Report, create a signed user in the Settings →
System menu (see section 2.6.1 of this manual, "System") and enable password
protected access.

2.4. Data Logger

PCON-Y17 allows you to record a series of measurements over time to display
data in a chart or table format.
Select CALIBRATOR from the main menu and select the desired configuration for
Pressure Control and Auxiliary Input.
Press the icon
The calibrator automatically starts the measurements and displays each
measured point on the chart.
For measurements to be saved, you must press the REC button (see Figure 73).
With this option selected, all points (measurement and time) are saved in an internal file
in PCON-Y17, which can be used to generate a table or chart.
Fig. 72 - Printed Task Report
and select DATA LOGGER.
PCON-Y17
- Parts
Page 53