Measure Mode - Presys PCON-Y17 Series Technical Manual

PRESYS
 Instruments
PCON-Y17

2.1.2. Measure Mode

In Measure mode, the calibrator shows the pressure measurement in the Control
Module. In this state, the control mode is disabled.
Fig. 09 - Measure mode – screen
Note: The pressure controller of 3000 psi range does not have the output isolation valves (module connection to
the outlet is always open) or VENT (no VENT port to the atmosphere).
Fig. 10 - Measure mode – state of the valves
Page 14