Entering System View; Exiting The Current View - H3C S5500-HI Series Fundamentals Configuration Manual

From system view, you can enter different function views. For example, enter interface view to
•
configure interface parameters, create a VLAN and enter its view, enter user interface view to
configure login user attributes, create a local user and enter local user view to configure the
password and level of the local user.
NOTE:
Enter ? in any view to display all the commands that can be executed in this view.
Figure 3 Command line views

Entering system view

When you log in to the device, you automatically enter user view, where <Device name> is displayed.
You can perform limited operations in user view, for example, display operations, file operations, and
Telnet operations. To perform further configuration on the device, enter system view.
Follow the step below to enter system view:
To do...
Enter system view from user view

Exiting the current view

The CLI is divided into different command views. Each view has a set of specific commands and defines
the effective scope of the commands. The commands available to you at any given time depend on the
view you are in.
Follow the step below to exit the current view:
Use the command...
system-view
3
Remarks
Required
Available in user view