Electrical Interfaces; Multi-Interface Connector; Connector Type - Iridium 9601 Product Developer Manual

Short burst data transceiver

Hide thumbs Also See for 9601:

Table of Contents

Iridium Satellite LLC

9601 SBD Transceiver Product Developers Guide

V1.24 120505

3.0 Electrical Interfaces

The subsections to follow contain information for the electrical interfaces of the 9601 SBD Transceiver.

The multi-interface connector includes five interfaces:

 DC power supply input

 Power on/off control

 RS-232 Serial data

 Network available output

 DC power output

The connector on the 9601 is a Samtec EHT series. This connector provides the ability for both a cable

connector as well as a stackable board to board connection. For cable connected applications use the

Samtec TCSD series. For PCB stacking use the Samtec ESQT series.

Data sheets on these connectors can be found at:

EHT Series:

http://www.samtec.com/technical_specifications/overview.asp?series=EHT

TCSD Series:

http://www.samtec.com/technical_specifications/overview.asp?series=tcsd

ESQT Series:

http://www.samtec.com/technical_specifications/overview.asp?series=esqt

A suitable connector is the EHT-113-01-SM-D-SM.

Iridium Satellite LLC Proprietary & Confidential Information

Information contained herein is subject to change without further notice

Table of Contents