Iridium 9601 Product Developer Manual page 56

Iridium Satellite LLC
9601 SBD Transceiver Preliminary Product Developers Guide Appendix A –AT Command Reference
V1.24 120505
2.40 +SBDD –Short Burst Data: Clear SBD Message Buffer(s)
Exec Command:
+SBDD<Delete type>
This command is used to clear the mobile originated buffer, mobile terminated buffer or
both.
 The
<Delete type>
Clear the mobile originated buffer.
0
Clear the mobile terminated buffer.
1
Clear both the mobile originated and mobile terminated buffers.
2
 Using this command or power cycling the 9601 are the only means by which both
buffers are cleared.
 The mobile terminated buffer will be cleared when an SBD session is initiated.
 Sending a message from the 9601 to the ESS does not clear the mobile originated
buffer.
 Reading a message from the 9601 does not clear the mobile terminated buffer.
Command Response:
Buffer(s) cleared successfully.
0
An error occurred while clearing the buffer(s).
1
2.41 +SBDC –Short Burst Data: Clear SBD MOMSN
Exec Command:
+SBDC
This command will clear (set to 0) the mobile originated message sequence number
(MOMSN) stored in the 9601.
 The MOMSN is maintained even after power cycle.
Command Response:
The MOMSN was cleared successfully.
0
An error occurred while clearing the MOMSN.
1
Iridium Satellite LLC Proprietary & Confidential Information
Information contained herein is subject to change without further notice
parameter identifies which buffers are cleared.
56