Table of Contents
Advertisement
Iridium Satellite LLC
9601 SBD Transceiver Preliminary Product Developers Guide Appendix A –AT Command Reference
V1.24 120505
CTS
(V.24 signal) Clear To Send. This signal is used to control the flow
of data to the 9601
DCD
(V.24 signal) Data Carrier Detect
DCE
Data Communications Equipment. In this product, DCE refers to
the 9601
DSR
(V.24 signal) Data Set Ready. This signal, from the 9601, indicates
readiness to accept communication over the data port
DTE
Data Terminal Equipment. In this product, DTE refers to the FA
DTR
(V.24 signal) Data Terminal Ready. This signal, from the FA,
requests the 9601 to accept communication over the data port
ESS
ETC SBD Subsystem (synonymous with GSS)
ETC
Earth Terminal Controller, part of the Iridium Gateway
F i e l d A p p l i c a t i o n , t h e " h o s t " o f t h e 9601
FA
GSS
Gateway SBD Subsystem (synonymous with ESS)
IMEI
International Mobile Equipment Identity
MO
Mobile Originated
MOMSN
Mobile Originated Message Sequence Number
MT
Mobile Terminated
MTMSN
Mobile Terminated Message Sequence Number
RI
(V.24 signal) Ring Indicate. This signal, from the 9601, indicates
that an MT message is present at the ESS
RTS
(V.24 signal) Request To Send. This signal is used to control the
flow of data from the 9601.
SBD
Short Burst Data
UART
Universal Asynchronous Receiver Transmitter
Iridium Satellite LLC Proprietary & Confidential Information
Information contained herein is subject to change without further notice
Glossary
31
Advertisement
Table of Contents
