Iridium Satellite LLC
9601 SBD Transceiver Preliminary Product Developers Guide Appendix A –AT Command Reference
V1.24 120505
2.28 +IPR –Fixed DTE Rate
Set Command:
+IPR=<rate>
Set the data rate at which the 9601 will accept commands. The change in data rate
takes into effect after the result code (e.g.,
where:
:
<rate>
600 bps
1
1200 bps
2
2400 bps
3
4800 bps
4
9600 bps
5
19200 bps (default)
6
38400 bps
7
57600 bps
8
115200 bps
9
Read Command:
+IPR?
Query the current data rate. The response is in the form:
+IPR:<rate>
Test Command:
+IPR=?
List the supported data rates. The response is in the form:
+IPR:(supported <rate>
Iridium Satellite LLC Proprietary & Confidential Information
Information contained herein is subject to change without further notice
) is received by the DTE.
OK
settings
)
40