Table of Contents
Advertisement
Iridium Satellite LLC
9601 SBD Transceiver Preliminary Product Developers Guide Appendix A –AT Command Reference
V1.24 120505
Session completed but the requested Location Update was not accepted.
2
Reserved, but indicate Location Update failure if used.
3..14
Access is denied.
15
Transceiver-reported values
Transceiver has been locked and may not make SBD calls (see
16
command).
Gateway not responding (local session timeout).
17
Connection lost (RF drop).
18
Reserved, but indicate failure if used.
19..31
No network service, unable to initiate call.
32
Antenna fault, unable to initiate call.
33
Radio is disabled, unable to initiate call (see
34
Transceiver is busy, unable to initiate call (typically performing auto-
35
registration).
Try later, must wait 3 minutes since last registration.
36
Reserved, but indicate failure if used.
37..
Read Command:
+SBDAREG?
Query the current automatic MT registration mode. The response is of the form:
+SBDAREG:<mode>
Test Command:
+SBDAREG=?
List the supported mode settings. The response is of the form:
supported
+SBDAREG:(
Iridium Satellite LLC Proprietary & Confidential Information
Information contained herein is subject to change without further notice
settings
<mode>
)
command).
*Rn
+CULK
55
Advertisement
Table of Contents
