Iridium Satellite LLC
9601 SBD Transceiver Product Developers Guide
V1.24 120505
Figure 9 provides a reference for the pin designation. Note that this designation is when looking into the
multi-interface connector from above. It is not to scale and not representative of the actual connector
mechanical layout.
02
02
01 03
01 03
Figure 9: Multi-Interface Connector Pin Number Designation
Notes:
1. View looking into connector from above
2. Numbers indicate pin designations
3. Not to scale, for illustrative purposes only
4. Note location of connector notch
5. Connector notch faces towards opposite end to the antenna connector as shown in Figure 10
6. On the physical connector Pin 1 is indicated by an arrow mark
Iridium Satellite LLC Proprietary & Confidential Information
Information contained herein is subject to change without further notice
Connector notch
Connector notch
Figure 10: Multi Interface Connector Notch Location
26
26
25
25
Notch on
connector is on this
side
17