Table of Contents
Advertisement
Iridium Communications Inc.
9602 SBD Transceiver Product Developers Guide
Revision 5`
Test Name
Thermal Shock
Humidity
Vibration
Vibration
Shock
Shock
2.4 Physical Interface Connectors
The Iridium 9602/9602N SBD Transceiver incorporates three connectors:
•
A multiway user connector
•
An RF antenna connector
•
A GPS RF pass-through connector
The physical characteristics of the connectors and their electrical interfaces are described in more detail in
Sections 3.1.1 and 4.1 respectively.
3 Electrical Interfaces
The following subsections contain information for the electrical interfaces of the 9602/9602N SBD Transceiver
for the non-RF connections. The RF interfaces are covered in section 0.
3.1 User Connector
The user connector provides the following connections to the 9602/9602N module:
•
DC power supply input
•
Power on/off control
•
Serial data interface
•
Network available output
•
Supply power indicator output
Proprietary & Confidential Information
Distribution of guide restricted to product developers only. • Information contained in this guide is subject to change without notice.
Table 6a: 9602N Environmental Tests
Test Reference
EN60068-2-14:2009
IEC60068-2-78:2002
IEC60068-2-64:2008
SAE J1455: 2012 Section 4.10
EN60068-2-27:2009
SAE J1455: 2012 Section 4.11
Society of Automotive Engineers
Test Description
Change of Temperature,
-25°C to +70°C,
5 cycles of 1 hour each
Damp heat steady state
O
40
C 93% RH for 4 days
0.96 m2/s3 from 5Hz to 20Hz
21Hz to 500Hz dropping 6dB per octave
10-40Hz at 0.02g
40-500Hz dropping 6dB per octave
10G peak shock over a period of 11ms, 3 shocks
in 3 perpendicular orientations
Drop 1m onto concrete in 3 perpendicular
orientations (3 drops)
2
/Hz
20
Advertisement
Table of Contents
