Table of Contents
Advertisement
Iridium Satellite LLC
9601 SBD Transceiver Preliminary Product Developers Guide Appendix A –AT Command Reference
V1.24 120505
2.21 +CIER –Indicator Event Reporting (new)
Set Command:
+CIER=[<mode>[,<sigind>[,<svcind>[,<antind>]]]]
The set command enables or disables sending of the
the 9601 to the DTE in case of indicator state changes.
of the
unsolicited result codes.
+CIEV
<mode>:
Disable indicator event reporting; do not send
0
codes to the DTE; buffer the most recent indicator event for each indicator
in the 9601 (default).
Enable indicator event reporting; buffer the most recent
1
result code for each indicator when the data port is reserved (e.g. in SBD
data mode) and flush them to the DTE after reservation; otherwise forward
them directly to the DTE.
:
<sigind>
Control reporting of "signal quality" indicator changes:
No "signal quality" indicator reporting.
0
Enable "signal quality" indicator reporting using result code
1
+CIEV:0,<rssi>
where
The reported signal strength is the same value that would be returned by the
command.
When enabled, the signal quality indicator is reported only when the signal strength
changes.
:
<svcind>
Control reporting of "service availability" indicator changes:
No "service availability" indicator reporting.
0
Enable "service availability" indicator reporting using result code
1
+CIEV:1,<value>
Iridium Satellite LLC Proprietary & Confidential Information
Information contained herein is subject to change without further notice
is:
<rssi>
Equivalent to 0 bars on the signal strength indicator
0
Equivalent to 1 bars on the signal strength indicator
1
Equivalent to 2 bars on the signal strength indicator
2
Equivalent to 3 bars on the signal strength indicator
3
Equivalent to 4 bars on the signal strength indicator
4
Equivalent to 5 bars on the signal strength indicator
5
unsolicited result code from
+CIEV
controls the processing
<mode>
unsolicited result
+CIEV
+CIEV
unsolicited
+CSQ
36
Advertisement
Table of Contents
