Table of Contents
Advertisement
Iridium Satellite LLC
9601 SBD Transceiver Product Developers Guide
V1.24 120505
Figure 5: Mechanical mounting foot print for use when stacking the 9601 with a developer
provided PCB. (Dimensions in milli-meters, not to scale)
Notes for Figure 5:
1. Item 1 is a generic, developer provided PCB design and shown for illustrative purposes. This item is
the same as Item 6 in Figure 4.
2. Item 2 is available from Samtec in a variety of heights. This example shows a 0.425" version. The
part number for this connector is ESQT-113-02-L-D-425
3. Compatible heights of stand-offs and variants on Item 2 are as follows:
a. 0.425" height (shown) fits with 12mm high spacers
b. 0.327" height is minimum that can be used. Fits with 9.50mm spacers.
c. 0.800" height is the maximum height available fits with 21.50mm spacers.
d. Anything else in-between should work if 'Samtec height' = 'Spacer height' minus 1.20mm.
4. Suggested examples of spacer types and compatible fasteners:
a. M3 threaded thru' hole 6.0 A/F Hex x 12mm, re-use M3 x 20 shipping screws and
washers, add M3 x 8 screws and washers.
b. Plain thru' hole diameter 3.2-3.5, diameter 6.0 x 9.50mm, replace M3 x 20 shipping
screws with M3 x 30 screws (same nuts and washers.)
c. Plain thru' hole diameter 3.2-3.5, diameter 6.0 x 21.50mm, replace M3 x 20 shipping
screws with M3 x 35 screws (same nuts and washers.)
Iridium Satellite LLC Proprietary & Confidential Information
Information contained herein is subject to change without further notice
11
Advertisement
Table of Contents
