Iridium Satellite LLC
9601 SBD Transceiver Preliminary Product Developers Guide Appendix A –AT Command Reference
V1.24 120505
2.32 +SBDRT –Short Burst Data: Read a Text Message from the Module
Exec Command:
+SBDRT
This command is used to transfer a text SBD message from the single mobile
terminated buffer in the 9601 to the DTE. This command is similar to
but does
+SBDRB
not provide a length indicator or checksum. The intent of this command is to provide a
human friendly interface to SBD for demonstrations and application development. It is
expected that most usage of SBD will be with binary messages.
Once the command is entered, the SBD message in the mobile terminated buffer is
sent out of the port.
This command is similar to
except no length or checksum will be provided.
+SBDRB
The maximum mobile terminated SBD message length is 135 bytes.
The mobile terminated message buffer will be empty upon power-up.
Command Response:
+SBDRT:<CR> {mobile terminated buffer}
Iridium Satellite LLC Proprietary & Confidential Information
Information contained herein is subject to change without further notice
44