Table of Contents
Advertisement
WAKE0#
B66
WAKE1#
B67
BATLOW#
A27
Note:
1. Connector to SUS_S4#.
PCI Express wake up event signal.
Module has integrated PU resistor to 3.3VDUAL
Device - Connect to WAKE# pin of PCIE device.
Slot - Connect to WAKE# pin B11 of PCIE slot.
N/C if not used.
General purpose wake-up signal.
Carrier Board:
Connect to PME# of SIO
N/C if not use
In a type 7 system, BATLOW# can be used as a power
fail indication.
Carrier Board:
Connect to BATLOW# of Smart Battery.
N/C if not used.
１１６
I 3.3V
Suspend
CMOS
I 3.3V
Suspend
CMOS
I 3.3V
Suspend
CMOS
Advertisement
Table of Contents
