Set The Start Conditions - Beckman Coulter AU680 Training Manual

Set the Start Conditions

The Start Condition menu is used to create a data index, select a group of tests, and
enter the operator name.
An index is a data file identified by the date and time. Create a new index daily, each
shift, or as needed. There are two options available when creating a new index:
 Option 1: Create a new index from the New Index window that displays when
the analyzer is turned on from an End Process (system shutdown). This option is
available only for labs that shut down the analyzer at the end of the day
 Option 2: Create a new index from the Start Condition menu. This option is
available for continuously operating labs or if there is a need to create another
index in the same day
The group of tests determines the onboard tests to be performed in the index. Up to
three different groups can be defined on the system. A group of tests can be changed
without changing the index.
Practice
 Use the flowchart on the next page to practice creating a new index. To practice
creating an index following option 1 (turning the system on from an End Process),
you will need to first shut down and then turn the analyzer back on. Refer to
Chapter 7 As-Needed Tasks  Perform an End Process (System Shutdown)
manual for instructions on performing an end process
 Determine if your lab will have multiple "Group of Tests" defined. If so, identify when
you would need to change the group of tests
AU680 In-Lab Training Manual
Version 2.0 (September 2016)
Page 22 of 152
Beckman Coulter Professional Development
of this