General Purpose Input Output Module Mcb - Danfoss FC 300 Design Manual

FC 300 Design Guide
Figure 10.1: Frame sizes A2, A3 and B3

10.2 General Purpose Input Output Module MCB 101

MCB 101 is used for extension of digital and analog inputs and outputs of AutomationDrive FC 301 and AutomationDrive FC 302.
Contents: MCB 101 must be fitted into slot B in the VLT AutomationDrive.
• MCB 101 option module
• Extended fixture for LCP
• Terminal cover
MG.33.BC.22 - VLT ® is a registered Danfoss trademark
10 Options and Accessories
10
10-3