Danfoss FC 300 Design Manual page 151

FC 300 Design Guide
Terminal locations - Rectifier (F1, F2, F3 and F4)
Figure 7.24: Terminal locations - Rectifier (left side, front and right side view). The connector plate is 1.65 in [42 mm] below .0 level.
1) Load Share Terminal (-)
2) Earth ground bar
3) Load Share Terminal (+)
Terminal locations - Options cabinet (F3 and F4)
Figure 7.25: Terminal locations - Options cabinet (left side, front and right side view). The connector plate is 1.65 in [42 mm] below .0 level.
1) Earth ground bar
MG.33.BC.22 - VLT ® is a registered Danfoss trademark
7 Mechanical Installation - Frame size D, E and
F
7
7-21