Basic Wiring Example - Danfoss FC 300 Design Manual

8 Electrical Installation

8.6.6 Basic Wiring Example

8
1. Mount terminals from the accessory bag to the front of the ad-
justable frequency drive.
2. Connect terminals 18, 27 and 37 (AutomationDrive FC 302 only)
to +24 V (terminal 12/13)
Default settings:
18 = Start, par. 5-10 Terminal 18 Digital Input
27 = Stop inverse, par. 5-12
37 = safe stop inverse
8-38
[9]
Terminal 27 Digital Input [6]
MG.33.BC.22 - VLT ® is a registered Danfoss trademark
FC 300 Design Guide