Danfoss FC 300 Design Manual page 162

8 Electrical Installation
AC line power connector frame size A5 (IP 55/66)
When a disconnector is used (frame size A5) the PE must be mounted on the left side of the drive.
8
Figure 8.1: AC line input connections frame sizes B1 and B2
(IP 21/NEMA Type 1 and IP 55/66/ NEMA Type 12).
Figure 8.3: AC line input connections size B4 (IP20).
8-4
Figure 8.2: AC line input connections size B3 (IP20).
Figure 8.4: AC line input connections size C1 and C2 (IP 21/
NEMA Type 1 and IP 55/66/ NEMA Type 12).
MG.33.BC.22 - VLT ® is a registered Danfoss trademark
FC 300 Design Guide