Resetting To Default Values - Samson TROVIS 5571 Mounting And Operating Instructions

Universal input type
UE12=PT100↔PT1000
UE13=PT100↔PT1000
UE14=PT100↔PT1000
UE15=PT100↔PT1000
UE16=PT100↔PT1000
UE17=PT100↔PT1000
Back
Settings level
Date / time
RS-232/Slave
RS-485/Master
RS-232/Prog
Meter bus
Universal input type
Back
2.4

Resetting to default values

The values in the settings level can be reset to their default values.
Important!
Resetting to default values causes a application saved in the PLC to be deleted.
Proceed as follows:
1. Cut the power supply to the PLC.
2. Restart the PLC, while pressing down the reset key
"System is being initialized... Cold start values loaded!" appears briefly on the display
before the normal display with the current firmware version (displays on page 5) ap-
pears.
The values of the setting level are the same as the default values (see section 8.1).
If both temperatures are not the same:
Correct the sensor temperature.
Confirm corrected temperature.
If another type of universal input is selected:
Confirm the universal input type.
Returning to the settings level
Select Back to return to the settings level.
Exit the menu item.
Display: Settings level
Exiting the settings level
Select Back to return.
Exit the settings level.
Display: Normal display (depending on the
application)
with a pointed object.
Appendix
15
EB 5571 EN