Technical Data - Samson TROVIS 5571 Mounting And Operating Instructions

Appendix
8.2

Technical data

TROVIS 5571 Programmable Logic Controller (PLC)
Universal inputs
Outputs
Interfaces
Modbus slave interface
Optional:
Modbus master interface
Meter bus
Programming interface
Voltage supply
Power consumption
Ambient temperature
Storage temperature
Degree of protection
Class of protection
Degree of contamination
Overvoltage category
Humidity rating
Noise emission
Noise immunity
Noise suppression
Weight
34
EB 5571 EN
17 universal inputs, separately configurable as:
– Resistance input
Pt 100/500/1000, Ni 200/1000/2000, PTC/NTC, 1–2 kΩ
– Current input
0/4 to 20 mA (50 Ω parallel resistor)
– Voltage input 0–10 V
– Binary input, floating
10 binary relay outputs,
non-floating in pairs, 2 A/250 V AC
2 low-voltage binary outputs, 100 mA/50 V AC
4 analog outputs (0 to 10 V),
non-floating in pairs (max. load > 4.7 kΩ)
RS-232 for modem or point-to-point communication with PC
(RJ-12 jack at the back)
Modbus interface RS-485 over cable converter 1400-7308
RS-485 for communication with other Modbus instruments (connected
over terminals 1/2)
Connected over terminals 48/49/50
For installing an application created in IsaGraf
and data logging
230 V AC, 48 to 62 Hz
Approx. 8 VA
0 to 40 °C
–20 to 60 °C
IP 40
II
2
II
F
According to EN 61000-6-3
According to EN 61000-6-1
According to DIN VDE 0875
Approx. 0.6 kg
®
(front RJ-45 jack)