Manual Operation - Samson TROVIS 5571 Mounting And Operating Instructions

Manual operation

3 Manual operation
All outputs configured in manual operating mode. Refer to the wiring plan (–> section 7).
Note!
If the analog and binary output menus are activated without entering the key code before-
hand, the key icon
firm the setting. This setting is locked.
You can only change this setting after entering the key code first.
Proceed as follows:
Entering the key code
0000
Information level
Analog inputs
Analog outputs
Binary inputs
Binary outputs
Meter bus
System info
Back
16
EB 5571 EN
appears at the top of the display when you press the enter key to con-
Activate the editing mode.
Display: Entering the key code
Enter the valid key code.
Confirm the key code.
Display: Settings level
The "Date / time" menu item is highlighted.
Select Back to return.
Exit the editing mode.
Display: Normal display (depending on application )
Switch to the information level.
Display: Information level
"Analog inputs" menu item is highlighted.
Select required menu item "Analog outputs" or
"Binary outputs".
Activate the menu item.
Select the required output.
Activate the selected output.
Display: AA... or BA... blinks.
0000 blinks