Samson TROVIS 5571 Mounting And Operating Instructions page 12

Start-up
Settings level
Date / time
RS-232/Slave
RS-485/Master
RS-232/Prog
Meter bus
Universal input type
Back
RS-232/Slave
Modbus Slave
Modem
Baud rate
Back
Settings level
Date / time
RS-232/Slave
RS-485/Master
RS-232/Prog
Meter bus
Universal input type
Back
Note!
If no key is pressed for two minutes, the PLC automatically returns to the normal display.
12
EB 5571 EN
Confirm the key code.
Display: Settings level
The menu item "Date / time" is highlighted.
Select the menu item in which the settings are to be
changed, e.g. "RS-232/Slave".
Activate the selected menu item.
Select the data point which you want to change.
Activate the editing mode of the data point.
Display: Data point blinks.
Set the data point.
Confirm the setting.
Returning to the settings level
Select Back to return to the settings level.
Exit the menu item.
Display: Settings level
Exiting the settings level
Select Back to return.
Exit the settings level.
Display: Normal display (depending on the
application)